Yidimu GT01 Dental Guide Model Resin
Yidimu GT01 Dental Guide Model Resin is designed for high-detail dental guide model printing and model-based workflow review. It supports dental labs, clinics and digital dental teams that need clear guide-hole details, smooth model surfaces and stable LCD/DLP printing performance for non-final clinical model evaluation.
Yidimu GT01 Dental Guide Model Resin
A professional dental photopolymer resin for guide model printing, implant workflow review, fitting checks and dental model validation. GT01 is designed for dental labs, clinics and digital dental teams that need clear model details, stable LCD/DLP printing performance and controlled post-processing for non-final clinical model evaluation.
Dental Guide Model Resin for High-Detail Workflow Review
Yidimu GT01 Dental Guide Model Resin is developed for professional dental resin 3D printing workflows. It is used to produce dental guide models, implant workflow review models, dental arch models and other model samples that require smooth surfaces, visible details and repeatable printing preparation.
Product Model
GT01
Net Content
1 kg / bottle
Printer Compatibility
LCD / DLP photopolymerization printers, 385–405 nm wavelength
Recommended Layer Thickness
0.05 mm
Intended Use and Documentation Notice
GT01 is positioned for dental guide model printing, workflow review, fitting checks, training models and model-based validation. It should not be presented as a final patient-contact surgical guide material unless the required biocompatibility, sterilization and regulatory documentation is confirmed for the target market and application.
Before using printed parts in any regulated dental workflow, users should review the latest technical data sheet, safety data sheet, post-processing instructions, printer compatibility, local dental requirements and actual workflow validation results.
Built for Professional Dental Resin Printing Workflows
GT01 focuses on detail rendering, flow performance, surface quality and workflow compatibility for dental model production environments.
High Detail Rendering
Helps present fine dental model details, guide-hole structures and fitting areas when used with suitable printer settings and post-processing.
Smooth Surface Quality
Designed to support clean surface output for dental arch models, guide models and professional model review.
Good Liquidity
The resin can reflow effectively during printing, helping reduce layer separation risk and improve daily printing stability.
Broad Compatibility
Compatible with many LCD and DLP resin 3D printers using 385–405 nm photopolymerization systems.
Low Shrinkage
Low shrinkage performance helps maintain model shape after curing when printing and curing parameters are properly controlled.
Wear and Scratch Resistance
Suitable for dental model handling, fitting checks and professional workflow review after proper cleaning and curing.
Stress-Resistant Structure
Supports guide model and dental model applications that require a balance of hardness, handling strength and dimensional stability.
Low Odor Handling
The supplied product information describes a low-odor formula for a more comfortable printing environment during daily operation.
Application Areas for Dental Labs and Professional Users
GT01 is suitable for professional dental model workflows where detailed resin printing, stable preparation and controlled post-processing are required.
Dental Guide Models
For producing high-detail guide models used in dental workflow review, training, fitting checks and preparation validation.
Implant Workflow Review Models
For dental labs and clinics that need printed models to support implant guide design review, preparation checks and model-based communication.
Dental Arch Models
For printing upper and lower arch models with clear tooth morphology, smooth surfaces and visible anatomical details.
Orthodontic Review Models
For orthodontic model preparation, aligner workflow review and model-based treatment communication.
Dental Lab Model Production
For dental laboratories that need repeatable resin printing materials for daily model production and technical evaluation.
Training and Demonstration Models
For dental education, internal workflow testing, customer presentation and sample preparation before production use.
What to Confirm Before Using GT01
Dental resin printing depends on printer type, light intensity, slicing settings, model structure, resin condition, cleaning method and UV curing process. Before using GT01 in regulated or patient-related dental workflows, users should confirm material documentation, local requirements and actual workflow validation.
- Confirm printer wavelength and exposure settings before batch printing.
- Run sample prints before using the resin in a new workflow.
- Verify guide-hole details, fitting areas and model accuracy after cleaning and curing.
- Use professional dental judgment for any regulated or patient-related application.
- Refer to the latest TDS, SDS and local requirements before clinical or production use.
Reference Technical Information
| Product Name | GT01 Dental Guide Model Resin |
|---|---|
| Product Type | Dental photopolymer resin |
| Model | GT01 |
| Net Content | 1 kg |
| Printer Compatibility | LCD / DLP resin 3D printers |
| Wavelength | 385–405 nm |
| Shore Hardness | 81–86D |
| Flexural Strength | 50–67 MPa |
| Notched Impact Strength | 28–38 J/m |
| Viscosity | 300–450 cps |
The values above are reference information for resin selection and workflow testing. For procurement, regulated dental use or production validation, request the latest Yidimu TDS, SDS and post-processing instructions.
From Dental File to Finished Resin Model
A stable dental resin workflow requires correct file preparation, controlled exposure, clean post-processing and final inspection.
Prepare Dental File
Import the dental design file, check guide structure, wall thickness, hole details and model orientation.
Slice and Support
Set proper layer thickness, exposure time and supports according to printer light intensity and model geometry.
Shake and Load Resin
Shake the resin well before use. Clean the resin tank and forming platform before printing.
Print the Model
Print in a suitable environment. The supplied reference temperature range is 18–35°C.
Clean the Printed Part
Clean with 95% ethanol. The supplied ultrasonic cleaning reference time is 3–5 minutes.
UV Cure and Inspect
Post-cure under UV light, then inspect surface quality, guide-hole details, fitting areas and dimensional consistency.
Starting Parameters for Testing
The following values are reference settings from the supplied product images. Actual parameters should be adjusted according to printer model, light intensity, resin tank condition, model structure and printing result.
| Item | Reference Setting |
|---|---|
| Recommended Light Intensity | 3.1–5 mW/cm² |
| Layer Thickness | 0.05 mm |
| Normal Exposure Time | 2–3 s |
| Bottom Exposure Time | 20 s |
| Bottom Layer Number | 5 layers |
| Recommended Printing Temperature | 18–35°C |
These parameters are starting references for medium and strong light printers. Other printers should be tested and adjusted according to actual light intensity and print results.
Cleaning and Curing Are Critical for Final Model Quality
After printing, uncured resin should be removed carefully before UV curing. Correct cleaning and curing help improve surface quality, handling stability and final model consistency.
Cleaning
Use 95% ethanol for cleaning. The supplied reference ultrasonic cleaning time is 3–5 minutes.
UV Curing
The supplied reference air UV curing time is 5 minutes. Actual curing time may vary by curing box power, part thickness and model geometry.
Inspection
Check guide-hole details, margins, support marks, surface clarity and model fit after cleaning and curing.
Workflow Control
Keep resin tank, platform, slicer settings and curing conditions consistent for repeatable printing results.
Professional Resin Handling Notes
Proper storage and handling help maintain resin performance and reduce printing problems caused by contamination, light exposure or inconsistent material condition.
Shake Before Use
Shake the resin well before printing to keep the material condition consistent.
Avoid Skin Contact
Wear gloves and a mask during use. Avoid direct contact with uncured resin.
Keep Away From UV Light
Keep the bottle closed when not in use and avoid direct sunlight or strong UV exposure.
Keep Equipment Clean
Clean the resin tank and forming platform to maintain light transmission and printing stability.
Frequently Asked Questions
What printer types can use GT01 Dental Guide Model Resin?
Product reference information indicates, GT01 is compatible with many LCD and DLP photopolymerization printers using 385–405 nm wavelength systems. Users should test exposure settings before production printing.
Is GT01 suitable for final clinical surgical guide use?
GT01 should be positioned as a dental guide model resin for workflow review, fitting checks, training models and model-based validation unless final clinical-use documentation is confirmed. For patient-contact or regulated surgical guide applications, users must confirm the latest TDS, SDS, biocompatibility documentation, sterilization requirements, printer workflow validation and local regulatory requirements before use.
What cleaning method is recommended?
The supplied reference post-processing instruction shows cleaning with 95% ethanol, with ultrasonic cleaning for 3–5 minutes as a starting reference. Users should confirm the latest Yidimu post-processing instructions before production use.
What are the starting printing parameters?
The supplied reference settings are 0.05 mm layer thickness, 2–3 s normal exposure, 20 s bottom exposure and 5 bottom layers under 3.1–5 mW/cm² light intensity. Actual settings should be adjusted by printer model and print result.
Does the printed model need UV curing?
Yes. The supplied reference post-processing instruction recommends air UV curing for 5 minutes after ethanol cleaning. Actual curing time may vary depending on curing equipment and model structure.
Who is this resin suitable for?
GT01 is suitable for dental labs, dental clinics, digital dental centers, model making workshops and professional resin 3D printing users that need detailed dental guide model printing workflows.
Need Resin Parameters or Sample Printing Support?
Contact Yidimu to discuss printer compatibility, resin selection, dental model workflow, post-processing requirements and sample printing before bulk use.
